Paper Size Detection - Ricoh G104 Service Manual

2.2.4 PAPER SIZE DETECTION

1
2
3
4
[A]
[B]
• The paper size detection switch [A] is at the rear of the machine.
• The machine disables paper feed from a tray if the paper size cannot be
detected (if the paper size actuator is broken or no tray is installed)
• The actuator [B] is on the slide plate [C] that engages with the end fence [D].
• When the end fence moves, the actuator moves from side to side.
• The machine detects the paper size with the outputs from the paper size
detection switch, as shown in this table.
Paper Size
LG SEF
A4 SEF
LT SEF
US. EXE SEF
B5 SEF
A5 SEF/ HLT SEF
A5 LEF/ HLT LEF
SM
CÓPIA NÃO CONTROLADA
[D]
[C]
Switch Location
1 2
Push Push
- Push
Push Push
Push -
Push -
- Push
- -
11
CÓPIA NÃO CONTROLADA
DETAILED DESCRIPTIONS
G392D106.WMF
3 4
- -
Push -
Push Push
- -
- -
Push Push
Push Push
G392