Ricoh G104 Service Manual page 496

Service Mode Table
5842 002 Setting 2
5844 [USB]
5844 001 Transfer Rate
5844 002 Vendor ID
5844 003 Product ID
5844 004 Dev Release Num
5845 [Dlv Server Stting] Delivery Server Setting
5845 003 DeliErr DisplTime
5845 004 Delivery Options
5846 [UCS Setting]
LDAP Search TOut
5846 010
Sets the length of the timeout for the search of the LDAP server.
AddtB Acl Info
This SP must be executed immediately after installation of an HDD unit in a
basic machine that previously had no HDD. The first time the machine is
powered on with the new HDD installed, the system automatically takes the
5846 041
address book from the NVRAM and writes it onto the new HDD. However, the
new address book on the HDD can be accessed only by the system
administrator at this stage. Executing this SP by the service technician
immediately after power on grants full address book access to all users.
5846 046 IniSet/All AddrB
G160/G161
CÓPIA NÃO CONTROLADA
Bit 7: MSB related application
Selects the stamp type for the log of Net File
Application Analysis.
Bit switches:
*CTL Bit 0 to 6: Not used.
Bit 7
0: Minute/second/micro second
1: Date/hour/minute/second
Adjusts the USB transfer rate.
*CTL [0001 or 0004 / 0004 / -]
0001: Full speed, 0004: Auto Change
*CTL Displays the vendor ID.
*CTL Displays the product ID.
*CTL Displays the device release version number.
Specifies the retry interval.
*CTL
[60 to 900 / 300 / 1 second/step]
Specifies the maximum number of retries.
*CTL
[0 to 99 / 3 / 1/step]
*CTL
[1 to 255 / 60 / 1 /step]
*CTL
*CTL
5-116
CÓPIA NÃO CONTROLADA
SM