Ricoh G104 Service Manual page 180

ENGINE SERVICE MODE
5840 [IEEE 802.11b]
5840 006 Channel Max
5840 007 Channel Min
5840 011 WEP key number
5842 [NFA analisis] Net File Application Analysis
5842 001
G104
CÓPIA NÃO CONTROLADA
*CTL Sets the maximum number of channels
available for data transmission via the
wireless LAN. The number of channels
available varies according to location. The
default settings are set for the maximum end
of the range for each area. Adjust the upper
4 bits to set the maximum number of
channels.
EU: [1 to 13 / 13 / 1/step]
NA/ AS: [1 to 11 / 11 / 1/step]
*CTL Sets the minimum number of channels
available for data transmission via the
wireless LAN. The number of channels
available varies according to location. The
default settings are set for the minimum end
of the range for each area. Adjust the lower 4
bits to set the minimum number of channels.
EU: [1 to 13 / 1 / 1/step]
NA/ AS: [1 to 11 / 1 / 1/step]
*CTL Selects the WEP key.
[00 to 11 / 00 / 1 binary]
00: Key #1
01: Key #2 (Reserved)
10: Key #3 (Reserved)
11: Key #4 (Reserved)
*CTL
Prints or does not print the module log for
each bit.
[0 to 1 / 1 / 1/step]
0: Prints, 1: Not print
Bit switch:
• Bit 0: System or other related application.
• Bit 1: Captured related application
• Bit 2: Certification related application
• Bit 3: Address related application
• Bit 4: Control devices or transmission logs
• Bit 5: Output (print, fax or transmission)
• Bit 6: Documents related application
In the Bit 7, 0: Not print, 1: Print
• Bit 7: MSB related application
5-64
CÓPIA NÃO CONTROLADA
related application
related application
SM