Ricoh G104 Service Manual page 182

ENGINE SERVICE MODE
5857 009 HDD to SD (4MB)
5857 010 HDD to SD (Any)
5857 011 Erase HDD Log
5857 012 Erase SD Log
5857 013 Free Space on SD
5857 014 SD to SD (4MB)
5857 015 SD to SD (Any)
5857 016 Make HDD Log File
5857 017 Make SD Log File
5858 [Debug Save When]
5858 001 Engine SC Error
5858 002 System SC Error
5858 003 Any SC Error
5858 004 Jam
5859 [Log Save Key No.]
5859 001 Key 1
5859 002 Key 2
5859 003 Key 3
5859 004 Key 4
5859 005 Key 5
5859 006 Key 6
5859 007 Key 7
5859 008 Key 8
5859 009 Key 9
5859 010 Key 10
G104
CÓPIA NÃO CONTROLADA
*CTL Copies the most recent 4 MB of the debug
log from the hard disk to the SD card.
*CTL Sets the key number of the debug log copied
from the hard disk to the SD card.
*CTL Deletes the debug log from the hard disk.
*CTL Deletes the debug log from the SD card.
*CTL Shows the free space on the SD card.
*CTL Copies the most recent 4 MB of the debug
log from an SD card to a different SD card.
*CTL Sets the key number of the debug log copied
from an SD card to a different SD card.
*CTL Makes a log file on the HDD to save debug
logs. To save debug logs, the controller
*CTL
makes a log file first, then writes data in the
file. This procedure can use much time. The
user can switch off the main power switch
before the log is written in the file. To prevent
this possible problem, you can prepare a log
file in advance. If you do this, the controller
uses less time to save logs because the log
file is prepared.
*CTL Collects debug logs when an engine-related
SC code occurs.
[0 to 1 / 0 / 1/step]
0: OFF, 1: ON
*CTL Collects debug logs when a controller-related
SC code occurs.
[0 to 1 / 0 / 1/step]
0: OFF, 1: ON
*CTL Sets the SC code whose logs are collected.
[00000 to 65535 / 0 / 1/step]
*CTL Collects debug logs when a paper jam
occurs.
[0 to 1 / 0 / 1/step]
0: OFF, 1: ON
*CTL Sets the key number of a specific event (
NOTE) whose logs are saved in the specified
*CTL
storage (
*CTL
numbers are assigned, the logs are collected
*CTL
in this order: Key 1, Key 2, ..., Key 9, Key 10.
*CTL
NOTE: The event is set with SP5-857-2. The
*CTL
storage is set with SP5-858.
*CTL
[0000000 to 9999999 / 0 / 1/step]
*CTL
*CTL
*CTL
5-66
CÓPIA NÃO CONTROLADA
NOTE). When multiple key
SM