Ricoh G104 Service Manual page 495

5840 007 Channel Min
5840 011 WEP Key Select
5842 [GWWS Analysis] Net File Application Analysis
5842 001 Setting 1
SM
CÓPIA NÃO CONTROLADA
of the range for each area. Adjust the upper 4
bits to set the maximum number of channels.
EU: [1 to 13 / 13 / 1/step]
NA/ AS: [1 to 11 / 11 / 1/step]
Sets the minimum number of channels
available for data transmission via the
wireless LAN. The number of channels
available varies according to location. The
*CTL default settings are set for the minimum end
of the range for each area. Adjust the lower 4
bits to set the minimum number of channels.
EU: [1 to 13 / 1 / 1/step]
NA/ AS: [1 to 11 / 1 / 1/step]
Selects the WEP key.
[00 to 11 / 00 / 1 binary]
00: Key #1
*CTL
01: Key #2 (Reserved)
10: Key #3 (Reserved)
11: Key #4 (Reserved)
Prints or does not print the module log for
each bit.
[0 or 1 / 1 / 1/step]
0: Prints, 1: Not print
Bit switches:
Bit 0: System or other related application.
Bit 1: Captured related application
*CTL Bit 2: Certification related application
Bit 3: Address related application
Bit 4: Control devices or transmission logs
related application
Bit 5: Output (print, fax or transmission)
related application
Bit 6: Documents related application in bit
7, 0: Not printed, 1: Printed
5-115
CÓPIA NÃO CONTROLADA
Service Mode Table
G160/G161