FUSING
6.8 FUSING
6.8.1 OVERVIEW
12
11
1. Fusing tension roller
2. Cleaning roller
3. Oil supply roller
4. Pressure lever
5. Pressure roller
6. Hot roller
• For this model, a belt fusing system is used. This system has a faster warm-up
time than a standard hot and pressure roller system.
• The heating roller is made of aluminum to increase the temperature of the fusing
belt quickly.
• The hot roller is made of sponge, which becomes a little flat at the contact point
of the pressure roller. This increases the fusing nip. This roller does not contain a
heating lamp.
• The heating roller thermistor controls the temperature of the lamp.
• Each new fusing unit contains a fuse. A short time after a new fusing unit is
installed, this fuse blows. When this occurs, the machine detects that a new
fusing unit is installed.
The oil supply roller supplies oil to the fusing belt through the oiling roller. This
mechanism applies a constant thickness of oil to the fusing belt.
G104
CÓPIA NÃO CONTROLADA
3
2
1
10
9
8
CÓPIA NÃO CONTROLADA
7
6
G105D118.WMF
7. Fusing belt
8. Heating roller
9. Heating lamp
10. Thermistor
11. New fusing unit
detection fuse
12. Thermostat
6-58
4
5
SM