Ricoh G104 Service Manual page 202

ENGINE SERVICE MODE
8441 [T: 2-2-07]
8444 [P: 2-2-07]
8447 [O: 2-2-07]
The number of sheets of a specific paper size that the application program uses
[0~9999999/ 0 / 1]
001 A3
002 A4
003 A5
004 B4
005 B5
006 DLT
• These counters do not distinguish between LEF and SEF.
8451 [2-2-08]
The number of sheets fed from a specific tray
[0~9999999/ 0 / 1]
8451 001 Bypass Tray
8451 002 Tray 1
8451 003 Tray 2
8451 004 Tray 3
8451 005 Tray 4
8451 006 Tray 5
8451 007 Tray 6
8451 008 Tray 7
8451 009 Tray 8
8451 010 Tray 9
8461 [T: 2-2-09]
8464 [P: 2-2-09]
The number of sheets of specific paper types
[0~9999999/ 0 / 1]
001 Normal
002 Recycled
003 Special
004 Thick
• These counters increase when the paper is output. On the other hand, the PM
counter increases (to measure the service life of each feed roller) when the
paper is fed.
• Blank sheets (covers, chapter covers, slip sheets) are also counted.
• During duplex printing, a sheet printed on two sides and a sheet printed on one
side are both counted as 1.
G104
CÓPIA NÃO CONTROLADA
*CTL
Print pages/ Paper size
*CTL
*CTL
*CTL Print pages/ Paper tray
*CTL By-pass Tray
*CTL Printer
*CTL Paper Tray Unit/LCT (Optional)
*CTL Paper Tray Unit (Optional)
*CTL (Not used)
*CTL (Not used)
*CTL (Not used)
*CTL (Not used)
*CTL (Not used)
*CTL (Not used)
*CTL
Print pages/ Paper type
*CTL
005 Normal (Back)
006 Thick (Back)
007 OHP
008 Other
5-86
CÓPIA NÃO CONTROLADA
007 LG
008 LT
009 HLT
010 Full Bleed
254 Other (Standard)
255 Other (Custom)
SM