Ricoh G104 Service Manual page 210

ENGINE SERVICE MODE
9908 [Background Po.] Background potential
9908 001 Upper Limit
9908 002 Lower Limit
9910 [Charge Output]
9910 001 Charge Output
[Toner Fill Up]
9910 003 [All]
[TC Initial] Toner Cartridge Initial
9910 004 [All]
9910 005 [K]
9910 006 [M]
9910 007 [C]
9910 008 [Y]
[Toner Fill Up]
9910 010 [K]
9910 011 [M]
9910 012 [C]
9910 013 [Y]
9910 020 Upper Limit
9911 [TC Initial] Toner Cartridge Initial
9911 001 Maximum Repeat
9911 002 Threshold
9912 [ST Sensor]
9912 001 read
G104
CÓPIA NÃO CONTROLADA
*EGB Adjusts the upper limit vale of background
potential.
[0 to 300 / 130 / 1/step]
*EGB Adjusts the lower limit vale of background
potential.
[0 to 300 / 130 / 1/step]
- Performs the charge output.
- Fills up the toner for all colors.
- Initializes the all toner bottles for each mode.
-
-
-
-
- Fills up the toner for each color.
-
-
-
*EGB Adjusts the upper limit for filling up the toner.
If the toner is detected for [N] times, the
toner fill up mode ends.
[N] can be adjusted with this SP9910-020.
[1 to 5 / 3 / 1/step]
*EGB [1 to 30 / 15 / 1/step]]
*EGB [1 to 100 / 20 / 0.01V/step]
- Detects ST sensor output.
5-94
CÓPIA NÃO CONTROLADA
SM