Ricoh G104 Service Manual page 537

9910 [Factory Adj.]
9910 001 Charge Output
9910 003 [All] TC Initial
9910 004 [All] TC Initial
9910 005 [K] TC Initial
9910 006 [M] TC Initial
9910 007 [C] TC Initial
9910 008 [Y] TC Initial
9910 010 [K] Toner FillUP
9910 011 [M] Toner FillUP
9910 012 [C] Toner FillUP
9910 013 [Y] Toner FillUP
9910 020 Upper Limit
9910 021 MUSIC Vsg Adj.
9911 [TC Initial]
9911 001 Maximum Repeat
9911 002 Threshold
SM
CÓPIA NÃO CONTROLADA
*EGB Performs the charge output.
*EGB Performs the toner supply for all colors.
Performs the developer initializing for all
*EGB
colors.
*EGB Performs the developer initializing for black.
Performs the developer initializing for
*EGB
magenta.
*EGB Performs the developer initializing for cyan.
*EGB Performs the developer initializing for yellow.
*EGB Fills up the black toner.
*EGB Fills up the magenta toner.
*EGB Fills up the cyan toner.
*EGB Fills up the yellow toner.
Specifies the threshold for completing the
toner filled up. When the toner is detected
*EGB
three times, the filling up the toner ends.
[0 to 5/ 3 / 1 /step]
Selects the Vsg adjustment execution when
the line position adjustment is manually done.
[1 to 3 / 3 / 1 /step]
*EGB 1: Normal (ON except the line position
adjustment at printout interval)
2: Always ON
3: Always OFF
Adjusts the maximum toner cartridge
*EGB initializing time.
[1 to 30 / 15 / 1 /step]
Adjusts the threshold for toner cartridge
*EGB initializing.
[1 to 100 / 20 / 0.01 V/step]
5-157
CÓPIA NÃO CONTROLADA
Service Mode Table
G160/G161