Ricoh G104 Service Manual page 442

Service Mode Table
2656 007 Transfer Roller2
[Thin: [FC]: TE] Transfer roller current and discharge plate voltage correction
2658
for the trailing edge area of thin paper in color mode
2658 003 Separation
2658 007 Transfer Roller2
[Special3:[K]] Transfer roller current and discharge plate voltage for the image
area of special paper 3 in B/W mode
2751
Paper Side: 1st or 2nd
2751 007 T.Roll 2: 1st
2751 008 Separation: 1st
2751 021 T.Roll2:nd
2751 022 Separation: 2nd
[Special3:[FC]] Transfer roller current and discharge plate voltage for the
2756 image area of special paper 3 in color mode
Paper Side: 1st or 2nd
2756 013 T.Roll 2: 1st
2756 014 Separation: 1st
G160/G161
CÓPIA NÃO CONTROLADA
on the LCD actually means 200 %.
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different
*EGB
from these SP's values. For example, "20%"
on the LCD actually means 100%.
*EGB [0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different
from these SP's values. For example, "20%"
*EGB
on the LCD actually means 100%.
Adjusts the transfer roller current for 1st side.
*EGB
[0 to 100 / 7.5 / 0.1 -µA /step]
Adjusts the discharge plate voltage for 1st
*EGB side.
[0 to 4 / 2.0 / 0.1 -KV/step]
Adjusts the transfer roller current for 2nd
side.
*EGB
[0 to 100 / P2a: 15.0, P2b: 10.0 / 0.1 -µA
/step]
Adjusts the discharge plate voltage for 2nd
*EGB side.
[0 to 4 / 2.0 / 0.1 -KV/step]
Adjusts the transfer roller current for 1st side.
*EGB
[0 to 100 / 10.0 / 0.1 -µA /step]
*EGB Adjusts the discharge plate voltage for 1st
5-62
CÓPIA NÃO CONTROLADA
SM