Ricoh G104 Service Manual page 146

SERVICE MODE TABLE
2251 [Manual Toner] Forced Toner Supply
2251 001 [K]
2251 002 [M]
2251 003 [C]
2251 004 [Y]
2302 [Temp./Humidity] Temperature / Humidity Display
2302 001 Temperature
2302 002 Relative Humidity
2302 003 Absolute Humidity
2302 004 Current Environ.
2303 [Envir. Correct.] Environment Correction
2303 001 Manual Correct.
[EC Threshold] Environment Correction Threshold
2304
(Humidity, Environment) A. Humidity: Absolute Humidity
These SPs adjust the thresholds (absolute humidity) for each environment.
2304 001 A. Humidity: LL-MM
2304 002 A. Humidity: ML-MM
2304 003 A. Humidity: MM-MH
2304 004 A. Humidity: MH-HH
2306 [Vd Link Corre.] Vd Link Correction
2306 001 Setting
2306 002 Correction Coef.
2314 [Trans.Belt Bias] Transfer Belt Current at Process Control
2314 011 Process Cont. [K]
2314 012 Process Cont. [M]
2314 013 Process Cont. [C]
2314 014 Process Cont. [Y]
G104
CÓPIA NÃO CONTROLADA
Manually executes toner supply for each
color.
Displays the temperature.
[-128 to 127 / 0 / 0.1 deg/step]
Display the relative humidity.
[0 to 100 / 0 / 0.1%RH/step]
Display the absolute humidity.
[0 to 100 / 0 / 0.1 g/m
Display the current environment.
[0 to 4 / 0 / 1/step]
0: LL, 1: ML, 2: MM, 3: MH, 4: HH
*EGB Manually sets the environment.
[0 to 5 / 0 / 1/step]
0: OFF, 1: LL, 2: ML, 3: MM, 4: MH, 5: HH
*EGB [0 to 100 / 5.0 / 0.1 g/m3/step]
*EGB [0 to 100 / 8.0 / 0.1 g/m3/step]
*EGB [0 to 100 / 16.0 / 0.1 g/m3/step]
*EGB [0 to 100 / 26.0 / 0.1 g/m3/step]
*EGB Sets the Vd link correction.
[0 or 1 / 0 / -] Alphanumeric
0: Execute, 1: Not execute
*EGB Adjusts the Vd link correction coefficient.
[1.00 to 2.50 / 1.00 / 0.01/step]
*EGB Adjusts the transfer belt current at process
control for [K].
[0 to 60 / 15.0 / 0.1 µA/step]
*EGB Adjusts the transfer belt current at process
control for [M, C, Y].
*EGB
[0 to 60 / 12.5 / 0.1 µA/step]
*EGB
5-30
CÓPIA NÃO CONTROLADA
3
/step]
SM