6.6 DEVELOPMENT
6.6.1 OVERVIEW
1
2
3
4
1. Doctor blade
2. Developer hopper
3. Mixing coil (left)
This machine has four development units, one for each color. The developer in
each unit is supplied to the development roller by the two mixing coils. Electrostatic
attraction moves the developer to the surface of the roller.
The drum positioning plate and the rear shaft set the photoconductor gap between
the PCU and development roller. It is not adjustable in the field.
The TD sensor detects toner density. Each development unit has a TD sensor.
The diameter of the development roller is 18 mm (the circumference is
approximately 56.5 mm).
SM
CÓPIA NÃO CONTROLADA
6
5
4. TD sensor
5. Mixing coil (right)
6. Development roller
6-45
CÓPIA NÃO CONTROLADA
DEVELOPMENT
G105D102.WMF
G104