Ricoh G104 Service Manual page 179

5828 069 Job Spool (Protocol)
5828 084 Print Settings List
5828 085 IP Interface
5828 090 TELNET
5828 091 Web
5832 [HDD Init.] HDD Initialization
5832 001
5839 [IEEE 1394]
5839 004 Host Name
5839 007 Cycle Master
5839 008 BCR mode
5839 009 IRM 1394a Check
5839 010 Unique ID
5839 011 Logout
5839 012 Login
5839 013 Login MAX
SM
CÓPIA NÃO CONTROLADA
*CTL Switches job spooling off or on and enables
settings for job spooling protocols.
[0 to 1 / 1 / 1/step]
0: Off, 1: On
Bit switch:
• Bit 0: LPR
• Bit 1: FPT
• Bit 2: IPP
• Bit 3: SMB
• Bit 4: BMLinkS
• Bit 5: DIPRINT
• Bits 6 and 7: Reserved
- Prints a list of NCS related parameters.
- displays the IP interface.
[0 to 3 / -]
0: No IP device, 1: DHCP
2: Static IP address
3: DHCP and Static IP address
*CTL Enables or disables Telnet.
[0 to 1 / 1 / 1/step]
0: Disabled, 1: Enabled
*CTL Enables or disables the Web monitor.
[0 to 1 / 1 / 1/step]
0: Disabled, 1: Enabled
# Prepares the hard disk. Use this SP mode
only when there is a hard disk error.
*CTL Displays the host name.
*CTL [0 or 1 / 1 /-] Alphanumeric
0: Off, 1: On
*CTL [0 to 3 / 3 / 1/step] Alphanumeric
0: Standard, 1: IRM Color Copy
2: Reserved, 3: Always Effective
*CTL [0 or 1 / 0 /-]
0: Off, 1: On
*CTL [0 or 1 / 1 /-]
0: Off, 1: On
*CTL [0 or 1 / 1 /-]
0: Off, 1: On
*CTL [0 or 1 / 0 /-]
0: Off, 1: On
*CTL [0 to 63 / 8 / 1/step]]
5-63
CÓPIA NÃO CONTROLADA
ENGINE SERVICE MODE
G104