6.4 PAPER FEED
6.4.1 BY-PASS TRAY FEED AND SIZE DETECTION
Paper Feed Mechanism
When the paper detection feeler [A] detects a sheet of paper, the by-pass solenoid [B]
unlocks the feed shaft stopper at the left end of the by-pass feed shaft [C].
The by-pass feed shaft has the feed roller [D] and two cams [E]. These cams move the
paper support plate [F] up and down and pushes the sheets of paper against the feed roller.
Paper Size Detection Mechanism
There is no paper size detection mechanism on the by-pass tray in this printer. Paper size
on the by-pass tray can be adjusted with the operation panel or printer driver.
SM
CÓPIA NÃO CONTROLADA
6-13
CÓPIA NÃO CONTROLADA
Paper Feed
G160/G161