Ricoh G104 Service Manual page 176

ENGINE SERVICE MODE
5801 015 Clear UCS Setting
5801 016 MIRS Setting
5801 017 CCS
5802 [Engine Free Run]
5802 001
5803 [Input Check]
5.2.4
5804 [Output Check]
5.2.5
5807 [Destin. / Model] Destination Code / Model
5807 001 Destination Code
5807 002 Model
5808 [Destination] Destination Code Display
5808 001 Destin. Code Disp
5810 [Fusing SC Reset]
5810 001
5811 [Serial No.] Machine Serial No. Setting
5811 001 Setting
5811 002 Display
5811 003 ID 2 Code Display
G104
CÓPIA NÃO CONTROLADA
*CTL Resets or deletes the UCS-related data.
Resets or deletes the MIRS-related data.
Resets or deletes the CSS-related data.
FA
Performs a free run on the printer engine.
NOTE:
1) The machine starts free run in the same
condition as the sequence of A4/LT
printing from the 1st tray. Therefore,
paper should be loaded in the 1st tray, but
paper is not fed.
2) The main switch has to be turned off and
on after using the free run mode for a test.
*EGB [0 to 4 / 0 / 1/step] Alphanumeric
0: DOM, 1: OTHER, 2: ASIA
3: ERP. 4: USA
*EGB [0 or 1 / 0 / -]
0: Pla (G104), 1: Plb (G105)
*EGB Displays the destination code.
[0 to 4 / 0 / 1/step] Alphanumeric
0: DOM, 1: OTHER, 2: ASIA
3: ERP. 4: USA
Resets a type A service call condition. Turn
the main power switch off and on after
resetting the SC code.
*EGB Sets the machine serial number.
*EGB Displays the machine serial number.
*CTL Displays the ID 2 Code.
5-60
CÓPIA NÃO CONTROLADA
FA
FA
SM