Ricoh G104 Service Manual page 440

Service Mode Table
2628 003 Separation
[Thin: [K]] Transfer roller current and discharge plate voltage for the image
area of thin paper in B/W mode
2631
Unit -> T.Roll2: Transfer roller, Separa.: Discharge plate (paper separation)
2631 007 Transfer Roller 2
2631 008 Separation
[Thin: [K]] Transfer roller current and discharge plate voltage for the image
2633 area of thin paper in B/W mode
Process Speed -> LS: Low Speed
2633 007 T.Roll 2: LS
2633 008 Separation: LS
[Thin: [FC]] Transfer roller current and discharge plate voltage for the image
2636
area of thin paper in color mode
2636 013 Transfer Roller 2
2636 014 Separation
[Thin: [FC]] Transfer roller current and discharge plate voltage for the image
2638 area, of thin paper in color mode
Process Speed -> LS: Low Speed
2638 013 T.Roll 2: LS
2638 014 Separation: LS
G160/G161
CÓPIA NÃO CONTROLADA
The value displayed on the LCD is different
*EGB from these SP's values. For example, "20%"
on the LCD actually means 100%.
Adjusts the transfer roller current.
*EGB
[0 to 60 / 30.0 / 0.1 -µA /step]
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2.0 / 0.1 -KV/step]
Adjusts the transfer roller current.
*EGB
[0 to 60 / 15.0 / 0.5 -µA /step]
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2.0 / 0.1 -KV/step]
Adjusts the transfer roller current.
*EGB
[0 to 100 / P2a 27.5/25.0 (NA/EU), P2b:
30.2/24.3 (NA/EU) / 0.1 -µA /step]
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2.0 / 0.1 -KV/step]
Adjusts the transfer roller current.
*EGB
[0 to 100 / P2a 17.5, P2b: 21.3/18.3 (NA/EU)
/ 0.1 -µA /step]
*EGB Adjusts the discharge plate voltage.
5-60
CÓPIA NÃO CONTROLADA
SM