Ricoh G104 Service Manual page 363

SC
Symptom
[Level]
[D] An error is detected while the
all data of the HDD or
NVRAM are formatted
logically by the Data
Overwrite Security Unit
(B735).
876 Log Data Error
Log Data Error 1
An error was detected in the handling of the log data at power on or during
001
machine operation. This can be caused by switching the machine off while it
[D]
is operating.
1. Initialize the HDD with SP5832-004.
Log Data Error 2
002
The DESS module is not installed when the DESS module is set to ON.
[D]
1. Replace the DESS module.
2. Turn off the DESS module function.
Log Data Error 3
003
Invalid encryption key log due to defective NVRAM data
[D]
1. Initialize the HDD with SP5832-004.
2. Disable the log encryption setting.
Log Data Error 4
004
Unusual encryption function log due to the defective NVRAM data
[D]
1. Initialize the HDD with SP5832-004.
Log Data Error 5
005
NVRAM or HDD, which is used in other machine, is installed.
[D]
1. Reinstall the previous NVRAM or HDD.
2. Initialize the HDD with SP5832-004.
Log Data Error 99
099
Other than above causes
[D]
1. Ask your supervisor.
HDD Data Overwrite Security SD card error
877
The all delete cannot be
[B]
executed even though the
SM
CÓPIA NÃO CONTROLADA
Possible Cause/Required Action
The logical format for HDD fails.
1. Turn the main switch off/on and try the
operation again.
Defective SD card (B735)
Not installed SD card (B735)
4-29
CÓPIA NÃO CONTROLADA
Service Call Conditions
G160/G161