Electrical Components; Controller Board - Ricoh G104 Service Manual

3.4 ELECTRICAL COMPONENTS

Before you replace the EGB (Engine Board), the controller, or the NVRAM,
print out the SMC reports ("SP Mode Data" and "Logging Data").
After you replace the EGB (Engine Board) or the controller, remove the
NVRAM from the old board and install it on the new board. If the NVRAM on
the old board is defective, replace the NVRAM (see 'NVRAM Replacement
Procedure').

3.4.1 CONTROLLER BOARD

1. Controller unit [A] (
2. Controller unit cover [B] (
SM
CÓPIA NÃO CONTROLADA
x 3)
x 4)
3-9
CÓPIA NÃO CONTROLADA
Electrical Components
G160/G161