Loading Paper - Ricoh G104 Service Manual

1.2.3 LOADING PAPER

CAUTION: Be careful not to pull the paper tray with too much force when you
remove it from the machine. This can let the tray fall and cause
personal injury.
1. Pull the paper tray [A] out of the printer
until it stops. Then tilt slightly, and pull
it out. Put it on a flat surface.
NOTE: You cannot pull tray 1 out if
the by-pass tray is open.
2. Adjust the green clips of the side guide
and the end guide to the paper size
you want.
3. Move the green switch on the front of
the tray to match the type of paper you
want to load. Move the switch to the
left when you load thick paper of 75
g/m or more.
2
SM
CÓPIA NÃO CONTROLADA
1-7
CÓPIA NÃO CONTROLADA
MACHINE INSTALLATION
[A]
G105I909.WMF
G105I910.WMF
G105I911.WMF
G104