Service Mode Table; Controller Service Mode - Ricoh G104 Service Manual

5.2 SERVICE MODE TABLE

5.2.1 CONTROLLER SERVICE MODE

1001 [Bit Switch]
1001 001 Bit Switch 1
1001 002 Bit Switch 2
1001 003 Bit Switch 3
1001 004 Bit Switch 4
1001 005 Bit Switch 5
1001 006 Bit Switch 6
1001 007 Bit Switch 7
1001 008 Bit Switch 8
1001 009 Bit Switch 9
1001 010 Bit Switch A
1001 011 Bit Switch B
1001 012 Bit Switch C
1001 013 Bit Switch D
1001 014 Bit Switch E
SM
CÓPIA NÃO CONTROLADA
*CTL Adjusts bit switch settings. DFU
*CTL Bit 0 to 2: Not used. Do not change settings.
Bit 3: Changing print language (PCL <-> PS)
0: Enabled
1: Disabled (No change)
Bit 4 to 7: Not used. Do not change settings.
*CTL Bit 0: PostScript3 Euro glyph
0: Disabled
1: Enabled (Even if there is no Euro Glyph in
ROM, it is possible to load the Euro Glyph
data.)
Bit 1: Not used. Do not change setting.
Bit 2:PCL5e/5c (HP4000/HP8000)
The left space command is set to "0", the
machine is changed to "1"
0: Disabled
1: Enabled
Bit 3: PCL5e/GL2: pen # of PW
0: Normal
1: Patch
Bit 4: Tray selecting
0: Select tray is determined auto tray selecting
1: Like HP/SV
Bit 5 to 7: Not used. Do not change settings.
*CTL Adjusts bit switch settings. DFU
*CTL Bit 0 to 2: Not used. Do not change settings.
Bit 3: Enabled the "%%" command of the
PostScript detection condition for the auto print
language selection function.
0: Enabled
1: Disabled
Bit 4 to 7: Not used. Do not change settings.
*CTL Adjusts bit switch settings. DFU
*CTL
*CTL
*CTL
*CTL
*CTL
*CTL
*CTL
*CTL
5-5
CÓPIA NÃO CONTROLADA
SERVICE MODE TABLE
G104