Ricoh G104 Service Manual page 493

5828 052 ECP
5828 065 Job Spool
5828 066 HD job Clear
5828 069 Job Spool (Protocol)
TELNET (0: OFF, 1:
5828 090
ON)
5828 091 Web (0: OFF, 1: ON)
5828 145 Active IPv6 Link
5828 147 Active IPv6 Stat (1)
SM
CÓPIA NÃO CONTROLADA
Switches the ECP setting for Centronics
off/on.
[0 or 1 / 1 / -]
0: Disabled, 1: Enabled
*CTL
Switches the job spool on/off.
*CTL [0 or 1 / 0 / -]
0: Disabled, 1: Enabled
Selects the treatment of the job when a
spooled job exists at power on.
*CTL
[0 or 1 / 1 / 1/step]
0: Data is cleared, 1: Automatically printed
Switches job spooling off or on and enables
settings for job spooling protocols.
[0 or 1 / 1 / 1/step]
0: Off, 1: On
Bit switches:
Bit 0: LPR
*CTL
Bit 1: FPT
Bit 2: IPP
Bit 3: SMB
Bit 4: Not used.
Bit 5: DIPRINT
Bits 6 and 7: Reserved
Enables or disables Telnet.
*CTL [0 or 1 / 1 / 1/step]
0: Disabled, 1: Enabled
Enables or disables the Web monitor.
*CTL
[0 or 1 / 1 / 1/step]
0: Disabled, 1: Enabled
Displays the IPv6 link local address for the
wireless LAN or Ethernet.
Displays the IPv6 stateless address 1 to 5 for
5-113
CÓPIA NÃO CONTROLADA
Service Mode Table
With "1" selected, SP5-828-050 must
be enabled for 1284 mode
compatibility.
G160/G161