Ricoh G104 Service Manual page 204

ENGINE SERVICE MODE
8521 [T: 2-2-15]
8524 [P: 2-2-15]
The number of pages processed by the finisher
[0~9999999/ 0 / 1]
001 Sort
002 Stack
003 Staple
004 Booklet
• Even if the pages are too many for the finisher to staple, all pages are counted
(including unstapled pages).
• The counter of stapling (003) increases by +1 when the paper is transported from
the printer to the tray of the finisher. Even if a paper jam occurs on this path, the
counter (003) increases. If the same job is retried, the counter (003) increases
once again.
8531 [T: 2-2-16]
The number of staples
[0~9999999/ 0 / 1]
8581 [T: 2-2-23]
The number of outputs in a specific color mode
[0~9999999/ 0 / 1]
001 Total
002 Total: Full Colo
003 B&W/Single Color
004 Development: CMY
005 Development: K
008 Print: Color
009 Print: B/W
8584 [P: 2-2-23]
The number of outputs in a specific color mode
[0~9999999/ 0 / 1]
8584 001 B/W
8584 002 Single Color
8591 [O: 2-2-23]
The number of A3/DLT, duplex printing, or staples
[0~9999999/ 0 / 1]
8591 001 A3/DLT
8591 001 Duplex
• Note that these counters are not for the printer application program.
G104
CÓPIA NÃO CONTROLADA
*CTL
Print pages/ Finish post-print processing
*CTL
005 Z-Fold
006 Punch
007 Other
*CTL Staples
*CTL Total counter
010 Total: Color
011 Total: B/W
012 Full Colour: A3
013 Full Colour: ~B4
014 Full Colour Prin
015 Mono Colour Prin
*CTL Print counter
8584 003
*CTL Other counter
8591 001
5-88
CÓPIA NÃO CONTROLADA
Full Color
Staple
SM