By-Pass Paper Size Detection Board - Ricoh B064 Service Manual

PAPER FEED

3.11.11 BY-PASS PAPER SIZE DETECTION BOARD

B064R703.WMF
Registration inner cover (! x2)
• Not shown. This cover is directly below the by-pass tray.
[A]: Connector (" x1)
[B]: Ground wire (! x1)
[C]: By-pass tray
• Disconnect the by-pass tray from the pins on both sides.
[D]: By-pass table (! x2)
[E]: By-pass paper size detection board (! x2)
After installation, execute SP1904 to calibrate the maximum and minimum paper
sizes for the side fences:
• SP1904 001 By-pass Tray Paper Size Detection – Minimum Size
Move the side fences to the minimum size, then execute this SP.
• SP1904 002 By-pass Tray Paper Size Detection – Maximum Size
Move the side fences to the maximum size, then execute this SP.
B064/B065
[B]
[A]
[C]
[D]
3-98
[E]
B064R704.WMF
SM