Developer Initialization - Ricoh G104 Service Manual

PROCESS CONTROL

6.2.6 DEVELOPER INITIALIZATION

When the machine detects that a new PCU was installed, it initializes the
developer.
To do this, the machine mixes the developer for a few seconds, and adjusts V
(control voltage for TD sensor) to adjust V
volts. The machine stores this V
During PCU initialization, the machine automatically supplies toner because there
is no toner in the toner supply pipe at installation. Then the machine performs a
process control self-check.
G104
CÓPIA NÃO CONTROLADA
(TD sensor output) equal to 2.5 ± 0.1
T
as V .
T REF
6-16
CÓPIA NÃO CONTROLADA
CNT
SM