Ricoh G104 Service Manual page 502

Service Mode Table
5860 008 POP to SMTP Wait
5860 009 Mail Receive Pro
5860 013 POP3/IMAP4 Auth.
5860 014 POP3 Srvr Port No.
5860 015 IMAP4 Srv Port
5860 016 SMTP Rx Port No
5860 017 Mail Rx Interval
5860 019 Mail Keep Setting
5860 020 ParMail Rec TOut
5860 021 MDN Res RFC2298
G160/G161
CÓPIA NÃO CONTROLADA
executed on the POP server before the
communication is established with the SMTP
server to transfer mails.
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
Adjusts the waiting time to access the SMTP
server after the authentication on the POP
*CTL
server.
[0 to 10000 / 300 / 1 ms/step]
Sets the protocol of receiving e-mail.
*CTL [1 to 3 / 1 / 1/step]
1: POP3, 2: IMAP4, 3: SMTP
Encrypts or does not encrypt passwords for
POP3/IMAP4 authentications.
*CTL
[0 to 2 / 0 / 1/step]
0: Automatic, 1: Not encrypt, 2: Encrypt
Adjusts the port number of the POP server.
*CTL
[1 to 65535 / 110 / 1/step]
Adjusts the port number of the IMAP4 server.
*CTL
[1 to 65535 / 143 / 1/step]
Adjusts the port number of the SMTP server.
*CTL
[1 to 65535 / 25 / 1/step]
Adjusts the interval of receiving an e-mail.
*CTL
[2 to 1440 / 3 / 1 minute/step]
Sets the way of keeping the e-mail in the
server.
[0 to 2 / 0 / 1/step]
*CTL
0: Not keeping
1: Keeping All
2: Keeping the only error e-mail
Adjusts the time for keeping the partial
e-mails. If the partial e-mails are not received
*CTL
during the set time, these are deleted.
[1 to 168 / 72 / 1 h/step]
*CTL Determines whether RFC2298compliance is
5-122
CÓPIA NÃO CONTROLADA
SM