Ricoh G104 Service Manual page 467

3162 003 M/A: [C]
3162 004 M/A: [Y]
3171 [P. Pattern] ID Sensor Pattern Setting ([Color]) DFU
3171 001 Interval: [K]
3171 002 Interval: [MCY]
3202 [Toner Near End] Toner Near End ([Color])
3202 001 Counter: [K]
3202 002 Counter: [M]
3202 003 Counter: [C]
3202 004 Counter: [Y]
3301 [Toner Mode] Toner Supply Control ([Color])
3301 001 [K]
3301 002 [M]
3301 003 [C]
3301 004 [Y]
3302 [Toner Mode] Toner Supply Control ([Color])
3302 001 Fixed Rate: [K]
3302 002 Fixed Rate: [M]
3302 003 Fixed Rate: [C]
3302 004 Fixed Rate: [Y]
3303 [Toner Mode] Toner Supply Control ([Color])
3303 001 T. Supply Rate: [K]
3303 002 T. Supply Rate: [M]
3303 003 T. Supply Rate: [C]
SM
CÓPIA NÃO CONTROLADA
*EGB [0 to 1.000 / 0 / 0.001 mg/cm
*EGB
Adjusts the interval of making the ID sensor
*EGB pattern.
[0 to 200 / 150 / 1 sheet/step]
*EGB [0 to 200 / 200 / 1 sheet/step]
*EGB
Displays the counter of the toner near end for
*EGB
each mode.
*EGB
[0 to 30 / 0 / 1/step]
*EGB
*EGB Selects the method of the toner suppy for
each mode.
*EGB
[0 to 3 / 3 / 1/step]
*EGB
0: Fixed, 1: Coefficient (Pixel),
2: Coefficient (TD sensor), 3: Hybrid
See 'Detailed Section Descriptions – Process
*EGB
Control – Toner Near-end/Toner End
Detection'
*EGB
Adjusts the toner supply rate for each mode.
*EGB These SPs are enabled only when SP3301
for each color is set to "0".
*EGB
[0 to 100 / 5 / 1%/step]
*EGB
*EGB Displays the toner supply rate for each mode.
[0 to 100 / 0 / 1%/step]
*EGB
*EGB
5-87
CÓPIA NÃO CONTROLADA
Service Mode Table
2
/step]
G160/G161