Ricoh G104 Service Manual page 471

3551 002 Job End 1: [Cl]
3551 003 Job End 2: [K]
3551 004 Job End 2: [Cl]
3551 005 Job End 3: [K]
3551 006 Job End 3: [Cl]
3553 [PC SelfChk]
3553 001 Idle Time
3554 [Pow. ON SelfChk] Power On Self-check
3554 001 Time
3554 002 Temp./ Humidity
3554 003 Time 2
3554 004 Temp./ Humidity 2
3555 [S.Chk Stand-by] Process Control Self-check Stand-by Time
3555 001
SM
CÓPIA NÃO CONTROLADA
after the interval of time that is set with SP
3555 001, if this number of pages was printed
*EGB
after the previous process control.
[0 to 2000 / 210 / 1 page/step]
*EGB At the end of a job, process control is done
immediately, if this number of pages was
printed after the previous process control.
*EGB
[0 to 2000 / 300 / 1 page/step]
*EGB In the middle of a job, printing stops and
process control is done if the number of
pages in the job gets to this number.
*EGB
[0 to 2000 / 500 / 1 page/step]
Adjusts the threshold time for the self check
*EGB without the machine operation.
[0 to 24 / 6 / 0.1 Hour/step]
Adjusts the threshold (Time) of the process
*EGB control from turning the power on.
[0 to 24 / 6.0 / 0.1 H/step]
Adjusts the threshold (Temperature/
*EGB Humidity) of the process control.
[0 to 100 / 6 / 0.1 g/m
Adjusts the threshold (Time) for developer
*EGB mixing after turning the power on.
[0 to 200.0 / 36.0 / 0.1 H/step]
Adjusts the threshold (Temperature/
Humidity) for developer mixing after turning
*EGB
the power on.
[0 to 100 / 6.0 / 0.1 g/m
*EGB Waiting time for the next job command after
5-91
CÓPIA NÃO CONTROLADA
Service Mode Table
3
/step]
3
/step]
G160/G161