Meter Charge - Ricoh G104 Service Manual

METER CHARGE

1.4 METER CHARGE
Change these SP modes settings if the customer has a service contract. The
settings depend on the contract type.
Item
Meter charge
Counting method
Fax No. Setting
NOTE: 1) The default setting for this machine is meter-charge mode off.
2) You cannot reset the meter-charge counter.
G104
CÓPIA NÃO CONTROLADA
SP No.
SP 5930 1 Specifies whether the meter charge
mode is enabled or disabled.
Meter charge mode enabled:
• The Counter menu shows
immediately after the Menu key is
pressed.
• The counter type selected by the
counting method (SP5-045-1) can
be displayed with the Counter
menu.
• The counter values can also be
printed with the Counter menu.
• The PM warning is not shown when
the replacement time arrives.
Meter charge mode disabled:
• The Counter menu is not shown.
SP 5045 1 Specifies whether the counting
method used in meter charge mode is
based on developments or prints.
SP 5812 2 Programs the service station fax
number.
The number is printed on the counter
list when the meter charge mode is
selected. This lets the user fax the
counter data to the service station.
CÓPIA NÃO CONTROLADA
Function
1-12
Default
Off
Prints
SM