Ricoh G104 Service Manual page 166

SERVICE MODE TABLE
3151 005 Diffusion: [K]
3151 006 Diffusion: [M]
3151 007 Diffusion: [C]
3151 008 Diffusion: [Y]
3161 [P. Pattern] ID Sensor Pattern Setting ([Color]) DFU
3161 001 Target Value: [K]
3161 002 Target Value: [M]
3161 003 Target Value: [C]
3161 004 Target Value: [Y]
3171 [P. Pattern] ID Sensor Pattern Setting ([Color]) DFU
3171 001 Interval: [K]
3171 002 Interval: [MCY]
3201 [Toner Near End] Toner Near End ([Color]) DFU
3201 001 Sensor: [K]
3201 002 Sensor: [M]
3201 003 Sensor: [C]
3201 004 Sensor: [Y]
3202 [Toner Near End] Toner Near End ([Color])
3202 001 Counter: [K]
3202 002 Counter: [M]
3202 003 Counter: [C]
3202 004 Counter: [Y]
3301 [Toner Mode] Toner Supply Control ([Color])
3301 001 [K]
3301 002 [M]
3301 003 [C]
3301 004 [Y]
3302 [Toner Mode] Toner Supply Control ([Color])
3302 001 Fixed Rate: [K]
3302 002 Fixed Rate: [M]
3302 003 Fixed Rate: [C]
3302 004 Fixed Rate: [Y]
3303 [Toner Mode] Toner Supply Control ([Color])
3303 001 T. Supply Rate: [K]
G104
CÓPIA NÃO CONTROLADA
Displays the Vsg output from ID sensor for
*EGB
each mode.
*EGB
[0.00 to 5.00 / 0.00 / 0.01 V/step]
*EGB
*EGB
*EGB Adjusts the target voltage of ID sensor
pattern for each mode.
*EGB
[0 to 100 / 50 / 1%/step]
*EGB
*EGB
*EGB Adjusts the interval of making the ID sensor
pattern.
*EGB
[0 to 200 / 60/ 1 sheet/step]
Displays the output from the toner end
sensor.
[0.0 to 5.0 / 0.0 / 0.1 V/step]
*EGB Displays the counter of the toner near end
for each mode.
*EGB
[0 to 30 / 0 / 1/step]
*EGB
*EGB
*EGB Selects the method of the toner suppy for
each mode.
*EGB
[0 to 3 / 3 / 1/step]
*EGB
0: Fixed, 1: Coefficient (Pixel),
*EGB
2: Coefficient (TD sensor), 3: Hybrid
6.2.5
*EGB Adjusts the toner supply rate for each mode.
These SPs are enabled only when SP3301
*EGB
for each color is set to "0".
*EGB
[0 to 100 / 5 / 1%/step]
*EGB
*EGB Displays the toner supply rate for each
5-50
CÓPIA NÃO CONTROLADA
SM