Ricoh G104 Service Manual page 142

SERVICE MODE TABLE
2152 041 [Y]: Area 2
2152 042 [Y]: Area 3
2152 043 [Y]: Area 4
2152 044 [Y]: Area 5
2152 045 [Y]: Area 6
2152 046 [Y]: Area 7
2152 047 [Y]: Area 8
2152 048 [Y]: Area 9
2152 049 [Y]: Area 10
2153 [MUSIC Setting] Timing for Automatic Line Position Adjustment (MUSIC)
2153 001 Auto Execution
2153 002 Process Control
2153 003 Initialization
2153 004 Data In
2153 005 Cut In
2153 006 Job End
2153 008 Trans. Belt Speed 2
G104
CÓPIA NÃO CONTROLADA
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB Enables or disables the automatic line
position adjustment. If this SP is 0, the
adjustment is never done.
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
*EGB Enables or disables the adjustment after
process control is done.
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
*EGB Enables or disables the adjustment
immediately after the power is turned on or
when recovering from energy save mode.
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
*EGB
Enables or disables the adjustment
immediately after the machine starts to
receive print job data. The adjustment is
done if one of the conditions set with
SP2153-012, -013 and –015 is satisfied.
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
*EGB Enables or disables the adjustment during
printing. The adjustment is done if one of the
conditions set with SP2153-012, -013 and –
015 is satisfied.
[0 or 1 / 1 / -] Alphanumeric
0: No, 1: Yes
*EGB Enables or disables the adjustment after
printing.
[0 or 1 / 0 / -] Alphanumeric
0: Off, 1: On
*EGB Enables or disables the transfer belt speed
correction during the adjustment. The
transfer belt speed is affected by changes in
temperature. A change of the transfer belt
speed during the adjustment causes color
registration errors. This SP keeps the
transfer belt at a constant speed.
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
5-26
CÓPIA NÃO CONTROLADA
SM