Service Mode Table
2153 002
Process Control
2153 003
Initialization
2153 004
Data In
2153 005
Cut In
2153 006
Job End
2153 008
Trans. Belt Speed 2
G160/G161
CÓPIA NÃO CONTROLADA
Enables or disables the adjustment after
process control is done.
*EGB
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
Enables or disables the adjustment
immediately after the power is turned on
or when recovering from energy save
*EGB
mode.
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
Enables or disables the adjustment
immediately after the machine starts to
receive print job data. The adjustment is
*EGB
done if one of the conditions set with
SP2153-012, -013 and –015 is satisfied.
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
Enables or disables the adjustment during
printing. The adjustment is done if one of
the conditions set with SP2153-012, -013
*EGB
and –015 is satisfied.
[0 or 1 / 1 / -] Alphanumeric
0: No, 1: Yes
Enables or disables the adjustment after
printing.
*EGB
[0 or 1 / 0 / -] Alphanumeric
0: Off, 1: On
Enables or disables the transfer belt
speed correction during the adjustment.
The transfer belt speed is affected by
changes in temperature. A change of the
*EGB
transfer belt speed during the adjustment
causes color registration errors. This SP
keeps the transfer belt speed constant.
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
5-36
CÓPIA NÃO CONTROLADA
SM