Electrical Components; Main Board; Main Board Of Sfp Models - Ricoh SP 150 Field Service Manual

Electrical Components

Main Board

• Do not throw away the transparent sheet covering the main board. This sheet protects the harness
from being scratched by the hooks on the inside of the bottom cover. After replacing the main
board, re-attach the sheet. If the adhesive is weak, reinforce with double-sided tape.
• Before replacing the main board, print the Configuration page by pressing the Power button 3
times rapidly.
• The EEPROM cannot be removed. Before replacing the main board, remember the machine's
"PNP ID", "Destination Code", and "Serial No.". After replacing the main board, enter them
manually by using CE Tools. For details, refer to page 55 "Using CE Tools".

Main Board of SFP Models

1. Remove the bottom cover.
2. Remove the main board [A]. (
(page 26)
×4, ×13)
Electrical Components
43