Srx210 Services Gateway Safety Requirements, Warnings, And Guidelines; Srx210 Services Gateway Laser And Led Safety Guidelines And Warnings - Juniper SRX210 Series Manual

SRX210 Services Gateway Hardware
Related
Documentation

SRX210 Services Gateway Safety Requirements, Warnings, and Guidelines

Related
Documentation

SRX210 Services Gateway Laser and LED Safety Guidelines and Warnings

52
Any equipment in a room in which a chemical fire extinguisher has been discharged is
subject to premature failure and unreliable operation. The equipment is considered to
be irreparably damaged.
NOTE: To keep warranties effective, do not use a dry chemical fire extinguisher
to control a fire at or near a Juniper Networks services gateway. If a dry
chemical fire extinguisher is used, the unit is no longer eligible for coverage
under a service agreement.
We recommend that you dispose of any irreparably damaged equipment in an
environmentally responsible manner.
SRX210 Services Gateway General Safety Guidelines and Warnings on page 47
SRX210 Services Gateway Installation Safety Guidelines and Warnings on page 91
To avoid harm to yourself or the device as you install and maintain it, follow the guidelines
for working with and near electrical equipment, as well as the safety procedures for
working with devices. For a discussion of how to make the installation site a safe
environment along with a list of safety warnings, see Appendix A, Safety and Regulatory
Compliance Information.
NOTE: Providing an exhaustive set of guidelines for working with electrical
equipment is beyond the scope of this guide.
General Site Guidelines for Installing the SRX210 Services Gateway on page 39
Required Tools and Parts for Installing and Maintaining the SRX210 Services Gateway
on page 78
Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation on page 85
The 1-Port SFP Mini-Physical Interface Module (Mini-PIM) is equipped with laser
transmitters, which are considered a Class 1 Laser Product by the U.S. Food and Drug
Administration, and they are evaluated as a Class 1 Laser Product per EN 60825–1 +A11
+A2 requirements.
This topic includes the following sections:
Laser and LED Safety Guidelines and Warnings on page 53
Copyright © 2012, Juniper Networks, Inc.