Srx5400 Services Gateway Laser And Led Safety Guidelines And Warnings; General Laser Safety Guidelines - Juniper SRX5400 Hardware Manual

Related
Documentation

SRX5400 Services Gateway Laser and LED Safety Guidelines and Warnings

General Laser Safety Guidelines

Related
Documentation
Copyright © 2014, Juniper Networks, Inc.
¡Atención! No usar una rampa inclinada más de 10 grados
Varning! Använd inte ramp med en lutning på mer än 10 grader.
SRX5400 Services Gateway General Safety Guidelines and Warnings on page 151
Chassis Lifting Guidelines on page 157
Installation Instructions Warning on page 158
Rack-Mounting Requirements and Warnings on page 159
General Laser Safety Guidelines on page 163
Class 1 Laser Warning on page 164
Class 1 LED Product Warning on page 164
Laser Beam Warning on page 165
Radiation from Open Port Apertures Warning on page 166
When working around the services gateway, observe the following safety guidelines to
prevent eye injury:
Do not look into unterminated ports or at fibers that connect to unknown sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
Class 1 Laser Warning on page 164
Class 1 LED Product Warning on page 164
Laser Beam Warning on page 165
Radiation from Open Port Apertures Warning on page 166
Appendix A: Safety and Regulatory Compliance Information
163