Unpacking The Srx5400 Services Gateway; Tools And Parts Required To Unpack The Srx5400 Services Gateway - Juniper SRX5400 Hardware Manual

CHAPTER 5
Unpacking the SRX5400 Services
Gateway

Tools and Parts Required to Unpack the SRX5400 Services Gateway

Related
Documentation

Unpacking the SRX5400 Services Gateway

Copyright © 2014, Juniper Networks, Inc.
Tools and Parts Required to Unpack the SRX5400 Services Gateway on page 43
Unpacking the SRX5400 Services Gateway on page 43
Verifying the SRX5400 Services Gateway Parts Received on page 45
To unpack the services gateway and prepare for installation, you need the following
tools:
Phillips (+) screwdriver, number 2
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping
pallet
Blank panels to cover any slots not occupied by a component
Overview of Installing the SRX5400 Services Gateway on page 33
Site Preparation Checklist for the SRX5400 Services Gateway on page 35
Unpacking the SRX5400 Services Gateway on page 43
Verifying the SRX5400 Services Gateway Parts Received on page 45
The services gateway is shipped in a wooden crate. A wooden pallet forms the base of
the crate. The device chassis is bolted to this pallet. A Getting Started Guide and a
cardboard accessory box are also included in the shipping crate.
The shipping container measures 33.5 in. (85.1 cm) high, 28 in. (71.1 cm) wide, and
26 in. (66.0 cm) deep. The total weight of the container containing the device and
accessories can range from 153 lb (70 kg) to 351 lb (159.2 kg).
43