Required Tools And Parts For Installing The Srx550 Services Gateway - Juniper SRX550 Hardware Manual

Preparing the SRX550 Services Gateway for Rack-Mount Installation | 67
Installing the SRX550 Services Gateway in a Rack | 69
Grounding the SRX550 Services Gateway | 77
Powering On the SRX550 Services Gateway | 93

Required Tools and Parts for Installing the SRX550 Services Gateway

To install the services gateway, you need the following tools and parts:
Phillips (+) screwdriver, number 2
Tie wrap
Electrostatic discharge (ESD) grounding wrist strap
RELATED DOCUMENTATION
Installation Overview for the SRX550 Services Gateway | 60
Installing the SRX550 Services Gateway in a Rack | 69
SRX550 Services Gateway Safety Requirements, Warnings, and Guidelines
61