Installing Wire Forms Guide
The wire forms guide helps direct the forms for stacking in the Front Push and Rear
Push forms paths.
1. Open the acoustic cover and tilt it all the way back until it lays flat on the top
2. Insert one end of the wire forms guide into the hole on the right hinge block of
3. Insert the other end of the wire forms guide into the hole on the left hinge block
Figure 1. Installing Wire Forms Guide
4. Close the acoustic cover.
Locating Operator Accessible Areas and Controls
As with many IBM printers, a part that is colored blue or has a blue decal on it is for
your use in operating the printer. These blue marks indicate tabs and levers that
control settings and changes for the machine.
cover.
the acoustic cover. See orientation in Figure 1.
of the acoustic cover.
5
Chapter 1. Printer Setup