Left Margin; Right Margin - IBM 4247 A00 User Manual

If you want to save the new value, press
value is stored in NVM) or STORE=CURRENT (new value remains valid until the
printer is powered off (O)). Press Menu/Enter to save the new value.

Left Margin

Note: You can find similar information in "Horizontal" on page 112 and "Right
Margin".
This parameter selects the left margin defined as a number of blank print positions
starting from the position set in Horizontal Adjustment ("Horizontal" on page 112) in
relation to the current pitch (characters-per-inch setting). Available values are:
v 0 (default)
v 0 to 66 (at 5 CPI)
v 0 to 79 (at 6 CPI)
v 0 to 100 (at 7.5 CPI)
v 0 to 114 (at 8.5 CPI)
v 0 to 134 (at 10 CPI and Prop)
v 0 to 161 (at 12 CPI)
v 0 to 202 (at 15 CPI)
v 0 to 231 (at 17.1 CPI)
v 0 to 270 (at 20 CPI)
To change or check the Left Margin:
1. Press Menu/Enter. The message PRINT OUT=NO displays.
until the message FORM SETTING displays.
2. Press
until the message LINE SP=xxxxxxx displays, where xxxxxxx can be 6
3. Press
LPI, 8 LPI, 12 LPI, 3L/30MM, 4L/30MM, 6L/30MM, 8L/30MM, or 12L/30MM.
until the message LEFT MARGIN=xxx displays, where xxx can be a value
4. Press
from 0 to 270 depending on your character-per-inch setting. If you want to select
a value other than the one displayed, press
5. To exit from Program Configuration, press
displays. If you want to exit without saving the new value, press Menu/Enter.
If you want to save the new value, press
value is stored in NVM) or STORE=CURRENT (new value remains valid until the
printer is powered off (O)). Press Menu/Enter to save the new value.

Right Margin

Note: You can find similar information in "Horizontal" on page 112 and "Left
Margin".
This parameter selects the right margin, which is defined as a number of blank print
positions (+2) starting from the left margin, and extending to the maximum number
of characters-per-line, at the current pitch. Available values are:
v 136 (default)
v 2 to 68 (at 5 CPI)
v 2 to 81 (at 6 CPI)
v 2 to 102 (at 7.5 CPI)
v 2 to 116 (at 8.5 CPI)
to select either STORE=SAVE (new
or
or .
until the message STORE=QUIT
to select either STORE=SAVE (new
or
Chapter 4. Configuring Your Printer
117