Custom Forms Menu (Ipds) - IBM InfoPrint 20 User Manual

Paper Menu Item
LTR-LEF*
AUXSIZE
LTR-SEF
LEGAL
FOLIO
11X17
A4-LEF
A4-SEF
JB5-LEF
JB5-SEF
B4
A5
A3
EXEC
STATMNT
MONARCH
HAGAKI
COM10
C5
DL
UNIV
UNI-ENV
TRAY1 PROT OFF*
|
TRAY2 PROT ON
|
TRAY3 PROT
|
AUXTRAYPROT
|
|
|
|
|
|
|
|

Custom Forms Menu (IPDS)

Use the Custom Forms Menu to define custom paper sizes for IPDS jobs. The
following table describes the settings you can change from the Custom Forms
Menu. An asterisk (*) next to a value in the table indicates the factory default.
Notes:
1. To select a new value, press the Enter key when the value is displayed in
the message display area. An asterisk (*) appears next to the value in the
message display area, indicating that is now active.
2. This menu appears only when you have the IPDS option installed.
94
InfoPrint 20: User's Guide -- CD Version
Value
Defines the paper or envelope size being used in the
auxiliary tray. LEF means long-edge feed. SEF means
short-edge feed. For more information about loading paper
in the auxiliary tray, see "Auxiliary Tray Paper
Specifications" on page 36 and "Loading Paper into the
Auxiliary Tray" on page 49.
Specifies whether to include a tray in the auto-switching
sequence. If a tray is not in the auto-switching sequence, its
paper will not be selected when another tray runs out of
paper. Tray switching is automatic when the printer detects
the wrong size paper in the requested tray. You cannot
"protect" trays from being included in this switching
sequence. See the description of TRAY SWITCH for more
information about tray switching.
v OFF—include the tray in the auto-switching sequence.
v ON—do not include the tray in the auto-switching
sequence.
Description