Show Current_Config Egress_Access_Profile - D-Link xStack Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28SC:admin# show egress_access_profile profile_id 1
Command: show egress_access_profile profile_id 1
Egress Access Profile Table
===============================================================================
=
Profile ID: 1
Mask on
Source MAC
Available Hardware Entries : 127
-------------------------------------------------------------------------------
-
Rule ID : 1
Match on
VLAN ID
Source MAC
Action:
Permit
===============================================================================
=
DGS-3620-28SC:admin#
6-5

show current_config egress_access_profile

Description
This command is used to display the egress ACL part of current configuration in user level of
privilege.
The overall current configuration can be displayed by "show config" command which is accessible
in administrator level of privilege.
Format
show current_config egress_access_profile
Parameters
None.
Restrictions
None.
Example
To display current configuration of egress access list table:
Profile name: 1 Type: Ethernet
: FF-FF-FF-FF-FF-FF
Port group: -
: 1
: 00-00-00-00-00-01
136