D-Link xStack Reference Manual page 208

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
None. (EI Mode Only Command)
Example
Show the information of the BGP peer group local1:
DGS-3620-28SC:admin# create bgp neighbor peer_group local1
Command: create bgp neighbor peer_group local1
Success.
DGS-3620-28SC:admin# create bgp neighbor 10.2.2.2 remote_as 10
Command: create bgp neighbor 10.2.2.2 remote_as 10
Success.
DGS-3620-28SC:admin# config bgp peer_group local1 add 10.2.2.2
Command: config bgp peer_group local1 add 10.2.2.2
Success.
DGS-3620-28SC:admin# show bgp peer_group local1
Command: show bgp peer_group local1
BGP Peer Group :local1
-----------------------------------------------------------------------
Description
Session State
Session Activity
Members
Remote AS
Advertisement Interval
Keepalive Interval
Holdtime Interval
AS Origination Interval
Connect Retry Interval
EBGP Multihop
Weight
Next Hop Self
Route Reflector Client
Send Community
Remove Private As
AllowAS In
Soft Reconfiguration Inbound
Default Originate
Outbound Route Filter (ORF) type (64) Prefix list:
Send Mode
Receive Mode
Prefix Max Count
Prefix Warning Threshold
Prefix Warning Only
:
: Enabled
: Enabled
: 10.2.2.2
: Not Set
: 30 seconds
: 60 seconds
: 180 seconds
: 15 seconds
: 120 seconds
: 1
: 0
: Disabled
: Disabled
: None
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: 12000
: 75
: Disabled
203