D-Link xStack Reference Manual page 918

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To disable PIM-SM for IPv6 network:
DGS-3620-28SC:admin# disable pim6
Command: disable pim6
Success.
DGS-3620-28SC:admin#
78-10 config pim6 last_hop_spt_switchover
Description
This command is used on the last hop router to decide whether to receive the multicast data from
the shared tree or switch over to the shortest path tree.
Format
config pim6 last_hop_spt_switchover [never | immediately]
Parameters
last_hop_spt_switchover - Specifies the SPT switchover mode on the last-hop switch.
never - Specifies that the mode will never switch to SPT. This is the default value.
immediately - Specifies that the mode will immediately switch to SPT.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
To set the SPT-switchover mode to never:
DGS-3620-28SC:admin# config pim6 last_hop_spt_switchover never
Command: config pim6 last_hop_spt_switchover never
Success.
DGS-3620-28SC:admin#
78-11 show pim6 neighbor
Description
This command is used to list all neighbors learned by the PIM6 on the switch.
Format
show pim6 neighbor {ipif <ipif_name 12>}
913