D-Link xStack Reference Manual page 645

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To configure JWAC redirect destination to JWAC login web page and a delay time of 5 seconds:
DGS-3620-28SC:admin#config jwac redirect destination jwac_login_page delay_time
5
Command: config jwac redirect_ destination jwac_login_page delay_time 5
Success.
DGS-3620-28SC:admin#
51-14 config jwac virtual_ip
Description
This command is used to configure JWAC virtual IP addresses used to accept authentication
requests from an unauthenticated host. The virtual IP of JWAC is used to accept authentication
request from unauthenticated host. Only requests sent to this IP will get correct responses. This IP
does not respond to ARP requests or ICMP packets.
Format
config jwac virtual_ip <ipaddr> {url [<string 128> | clear]}
Parameters
<ipaddr> - Enter the IP address of the virtual IP.
url - (Optional) Specify the URL of the virtual IP.
<string 128> - Enter the URL of the virtual IP.
clear - Clear the URL of the virtual IP.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure a JWAC virtual IP address of 1.1.1.1 to accept authentication requests from an
unauthenticated host:
DGS-3620-28SC:admin#config jwac virtual_ip 1.1.1.1
Command: config jwac virtual_ip 1.1.1.1
Success.
DGS-3620-28SC:admin#
51-15 config jwac update_server
Description
This command is used to add or delete a server network address to which the traffic from an
unauthenticated client host will not be blocked by the JWAC Switch. Any servers running ActiveX
640