Debug Stp State - D-Link xStack Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Message Age
Max Age
Forward Delay
Hello Time
Instance 1:
Port 1 :
Regional Root Bridge
Internal Root Cost
Designated Bridge
Designated Port
Remaining Hops
DGS-3620-28SC:admin#

21-14 debug stp state

Description
This command is used to enable or disable the STP debug state.
Format
debug stp state [enable | disable]
Parameters
state - Specifies the STP debug state.
enable - Enable the STP debug state.
disable - Disable the STP debug state.
Restrictions
Only Administrator level users can issue this command.
Example
To configure the STP debug state to enable, and then disable the STP debug state:
DGS-3620-28SC:admin# debug stp state enable
Command: debug stp state enable
Success.
DGS-3620-28SC:admin# debug stp state disable
Command: debug stp state disable
Success.
DGS-3620-28SC:admin#
: 0
: 20
: 15
: 2
: 0 /00-00-00-00-00-00
: 0
: 0 /00-00-00-00-00-00
: 0
: 20
316