D-Link xStack Reference Manual page 488

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28SC:admin#config erps raps_vlan 4094 rpl_port west
Command: config erps raps_vlan 4094 rpl_port west
Success.
DGS-3620-28SC:admin#config erps raps_vlan 4094 rpl_owner enable
Command: config erps raps_vlan 4094 rpl_owner enable
Success.
DGS-3620-28SC:admin#
To set the R-APS protected VLAN parameter:
DGS-3620-28SC:admin#config erps raps_vlan 4094 protected_vlan add vlanid 10-20
Command: config erps raps_vlan 4094 protected_vlan add vlanid 10-20
Success.
DGS-3620-28SC:admin#
To set the R-APS timer parameter:
DGS-3620-28SC:admin#config erps raps_vlan 4094 timer holdoff_time 100
guard_time 1000 wtr_time 10
Command: config erps raps_vlan 4094 timer holdoff_time 100 guard_time 1000
wtr_time 10
Success.
DGS-3620-28SC:admin#
34-6 config erps log
Description
This command is used to configure the ERPS log state.
Format
config erps log [enable | disable]
Parameters
enable - Enable the log state. The default value is disabled.
disable - Disable the log state.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
483