D-Link xStack Reference Manual page 457

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
28-3 disable dvmrp
Description
This command is used to disable the DVMRP global state on the Switch.
Format
disable dvmrp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
To disable DVMRP:
DGS-3620-28SC:admin# disable dvmrp
Command: disable dvmrp
Success.
DGS-3620-28SC:admin#
28-4 show dvmrp
Description
This command is used to display DVMRP configurations.
Format
show dvmrp {ipif <ipif_name 12>}
Parameters
ipif - (Optional) Specifies the IP interface name used for the display.
<ipif_name 12> - Enter the IP interface name used for the display here. This name can be up
to 12 characters long.
If no parameter is specified, then all the IP interfaces will be displayed.
Restrictions
None. (EI Mode Only Command)
452