D-Link xStack Reference Manual page 189

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28SC:admin#
Command: config bgp network 10.108.0.0/16 clear_routemap
Success.
DGS-3620-28SC:admin#
13-13 delete bgp network
Description
This command is used to delete the networks advertised by the Border Gateway Protocol (BGP).
Format
delete bgp network [<network_address> | all]
Parameters
<network_address> - Represents the local network that BGP will advertise.
all - Deletes all BGP networks.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
To delete network 10.108.0.0/16 to be advertised in the BGP updates:
DGS-3620-28SC:admin#
Command: delete bgp network 10.108.0.0/16
Success.
DGS-3620-28SC:admin#
13-14 show bgp network
Description
This command is used to show the networks advertised by the Border Gateway Protocol (BGP).
Format
show bgp network {<network_address>}
Parameters
<network_address> - (Optional) Represents the local network that BGP will advertise.
If a specific network address is not specified, all network addresses will be displayed.
config bgp network 10.108.0.0/16 clear_routemap
delete bgp network 10.108.0.0/16
184