D-Link xStack Reference Manual page 944

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Port Security Log State
System Maximum Address
VLAN Configuration (Only VLANs with limitation are displayed)
VID VLAN Name
---- --------------------------------
1 default
2 TstVLAN
DGS-3620-28SC:admin#
To display the port security information of switch ports 1 to 6:
DGS-3620-28SC:admin#show port_security ports 1-6
Command: show port_security ports 1-6
Port State Lock Address Mode
----- ------- ------------------
1 Disabled DeleteOnReset
2 Disabled DeleteOnReset
3 Disabled DeleteOnReset
4 Disabled DeleteOnReset
5 Disabled DeleteOnReset
6 Disabled DeleteOnReset
DGS-3620-28SC:admin#
80-8 config port_security log state
Description
This command is used to enable or disable the port security log.
Format
config port_security log state [enable | disable]
Parameters
enable - Specifies to enable the port security log.
disable - Specifies to disable the port security log.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the port security log:
: Disabled
: No Limit
Max. Learning Addr.
------------------
64
8
Max. Learning Addr.
-----------------
32
32
32
32
32
32
939