D-Link xStack Reference Manual page 230

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28SC:admin#
Command: show bgp confederation
BGP as number
Confederation identifier
Confederation Peer
Neighbor list:
IP address
---------------
192.168.1.1
192.168.1.2
192.168.1.3
DGS-3620-28SC:admin#
13-51 config bgp trap
Description
This command is used to configure the BGP trap state.
Format
config bgp trap [peer_established | peer_idle | all] [enable | disable]
Parameters
peer_established - Enable or disable the sending of the peer established trap. This default value
is disabled.
peer_idle - Enable or disable the sending of the peer idle trap. This default value is disabled.
all - Enable or disable the sending of both the peer idle and established trap. This default value is
disabled.
enable - Specifies that the trap feature will be enabled.
disable - Specifies that the trap feature will be disabled.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
This example disables the BGP peer idle trap state:
DGS-3620-28SC:admin#
Command: config bgp trap peer_idle disable
Success.
DGS-3620-28SC:admin#
show bgp confederation
: 65501
: 10
: 65502,65503
Remote AS number
--------------------
65502
65503
65501
config bgp trap peer_idle disable
225