D-Link xStack Reference Manual page 346

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
21-42 debug bgp show global_info
Description
This command is used for displaying global information of current BGP instance.
Format
debug bgp show global_info
Parameters
None.
Restrictions
Only Administrator-level users can issue this command. (EI Mode Only Command)
Example
Configure BGP to show global information:
DGS-3620-28SC:admin# debug bgp show global_info
Command: debug bgp show global_info
As Number: 1
Router ID
Cluster ID
Confed ID
Confederation Peers
Fast External Fallover
Graceful Restart
Restart Time
Stalepath Time
Update Delay Time
Dampening Ability
Client to Client Ability : Enable
Cluster peers are:
1.1.1.2 group1
Default Local PREF
Default HoldTime
Default Keepalive
Scan Time
BGP active flag:
BGP active af-flag is:
BGP_AF_CFLAG_NETWORK_SYNC
note: address family is IPv4 Unicast
BGP active Redist-Flags:
note: The address family is IPv4
：10.2.2.2
: 30.1.1.1
: 10
: 65510 65511
: Disabled
: Disabled
: 120 Seconds
: 360 Seconds
: 120 Seconds
: Enable
: 100
: 180
: 60
: 60
341